Skip to main content

Filter By:

  • Show More Brands

  • Show Fewer Brands
  • Show More Sizes
  • Show Fewer Sizes
  • Show More Model Years
  • Show Fewer Model Years

Parts & Accessories

$99.99
Computes and Transmits Meaningful Data - Computes and sends 6 running dynamics metrics to your compatible device - Battery life: replaceable battery lasts up to 1 year (assuming 1 hour daily use) - Automatically turns itself on and off - Tiny size: at less than 0.5 ounces, you'll forget it's there - Compatible devices connect with the Garmin Connect Mobile app to automatically sync your data and connect with others Train Hard, Run Free The Running Dynamics Pod easily clips onto your waistband to measure the running dynamics you need to beat yesterday. It gives you the option to run without a heart rate monitor chest strap. Once paired with your compatible smartwatch, just clip it to the back and center of your waistband and start your run. Review Your Form View and analyze important running metrics such as your cadence, stride length, ground contact time and balance, vertical oscillation and vertical ratio. These biomechanical measurements can help you understand your running form so you can perform better on race day. How It Works: The Running Dynamics Pod has an accelerometer in the module that measures torso movement to calculate these 6 running metrics: - Cadence is the number of steps per minute. It displays the total steps (right and left combined). - Ground contact time balance displays the left/right balance of your ground contact time while running. It displays a percentage. For example, 53.2 with an arrow pointing left or right. - Stride length is the length of your stride from 1 footfall to the next. It is measured in meters. - Vertical oscillation is your bounce while running. It displays the vertical motion of your torso, measured in centimeters for each step. - Vertical ratio is the ratio of vertical oscillation to stride length. It displays a percentage. A lower number typically indicates better running form. - Ground contact time is the amount of time in each step that you spend on the ground while running. It is measured in milliseconds.
$99.99
With full system integration, the RideControl series makes sure you have exactly everything you need at your fingertips. - Stealthy looks - Clean integration with handlebar - Simple and intuitive button functions: power up, power down, walk assist - Support Smart Assist mode - RideControl App button customization - Can be installed on right or left side of the handlebar - Multiple RideControl Ergo 3 can be added for different configuration - Must work with the RideControl Go
$99.99
Super-compact and lightweight magnet-less cycling sensors. The pair includes the Pro Speed Sensor (hub mounted) and the Pro Cadence Sensor (crank arm mounted). Both feature a translucent Composite Matrix construction with a LED indicator. And each has a high-tech dual Bluetooth system that can simultaneously pair with cycling computers and smart trainers. Replaceable CR2032 battery included. - Weight: 11g - Dimensions: 37 x 33 x 13mm
$99.99
Use this ANT+ antenna to connect an ANT+ trainer to your computer. That enables you to use computer software during your training sessions, such as the Tacx Trainer software, Zwift, and TrainerRoad. These programs read the training data transmitted by an ANT+ trainer and can control the trainer. It features a long cable so the receiver can be placed close to the trainer for an optimal reception without loss. The antenna is compatible with all trainers that communicate wirelessly via ANT+.
$93.99
- CNC Machined Aluminum - Combo Compatible (580 Add-On sold separately) - WAHOO approved replaceable computer insert protects computer tabs - Anodized Black with laser etched logos - Payload Capacity: Top - 123g / Bottom 242g with combo adapter - Weight: 50g - Mount Type: Clamp 31.8mm - Mount Weight: 53g Compatibly: - All Wahoo Cycling Computers- ROAM, BOLT, ELEMNT, MINI - Combo compatible (GoPro-style light/camera interface), K13-580-BLK adapter sold separately
$91.99 $99.99 8% Off
Get more data from your rides with the Bontrager Interchange digital combo speed and cadence sensor. This ANT+ 2.4 Ghz is designed to work with Bontrager Node wireless computers. It also works with many other ANT+ enabled devices. Sensor adjustment is easy with the adjustable arm. • ANT+ 2.4 Ghz and Bluetooth Smart wireless digital speed and cadence sensor • ANT+ and Bluetooth Smart allow simultaneous use of Trip 300 and smartphone • For use with many ANT+ and Bluetooth Smart wireless technology enabled devices • Independently adjustable arm for precise alignment of speed and cadence sensors • Includes Bontrager wheel magnet and crank cadence band • Includes silicone mounting strap to fit most chainstays and CR2032 battery • Visit www.thisisant.com/directory/ for compatible ANT+ devices • Visit www.bluetooth.com/pages/bluetooth-smart-devices.aspx for compatible Bluetooth devices
$89.99
CatEye Magnetless Bluetooth sensors with accelerometer. Dual-band Bluetooth, and ANT+ magnetless sensor with integrated accelerometer. Works with Padrone Digital, Padrone Smart+, Padrone Smart (in Mirror Mode), and Strada Smart. - Quick pairing with CatEye Cycling app - Sensors strap to hub shell and crank arm and uses accelerometer to measure speed/cadence
$89.99
Computer stem cap mount for negative XC cockpits providing a clean and uncluttered look. - Designed for Syncros Fraser iC SL XC cockpits - Replaces the top cap - Integrated design - Fits all Garmin models - Wahoo inserts available
$87.99
An excellent choice for mountain, cross, and road cyclists who prefer to have the computer above the stem. - Far and away more advanced than the plastic options on the market - Boost Stem Mount is specifically designed to fit atop the shortest stems on the market today - The Gravity Cap replaces your existing top cap and is ideal for Downhill, Enduro, Gravel, Touring, etc - The mount replaces a standard 5mm spacer and is locked securely in place by the top cap compression system - Compatibility: Wahoo ELEMNT, Wahoo Roam, Wahoo Bolt, Wahoo MINI - CNC-machined aluminum for low weight and strength - Made in the USA with a lifetime warranty - Stem mount that is for short, steep stem angles boosting the computer up above by 1cm
$87.99
- Direct mounting for an aero cockpit - Strongest platform for your cycling computer and light or camera - Compatible: Future, Venge, Tarmac stems - Fits all Wahoo computers including Wahoo Roam - CNC machined 6016-T6 aluminum - Weight: 54g - One bolt Specialized SL& stem face plate mounting system - Includes mounting bolt and TNut - Lifetime Warranty - Made in Boise, Idaho USA
$87.00
SRAM eTap Battery is the power source for the eTap system. The same power unit is interchangeable between front and rear derailleurs. - Up to 1000 kilometers of riding per charge - Weight: 24g - Finish: Black - Compatibility: SRAM RED eTap
$82.99
- CNC Machined Aluminum - Combo Compatible (580 Add-On sold separately) - WAHOO approved replaceable computer insert protects computer tabs - Anodized Black with laser etched logos - Payload Capacity: Top 123g / Bottom 242g with combo adapter - Weight: 47g - Mount Type: Clamp 31.8mm - Mount Weight: 47g Compatibly: - WAHOO BOLT and MINI (ROAM users choose MAX XL K13-4605) - Combo (GoPro-style light/camera interface) adapter compatible (K13-580-BLK sold separately)
$79.99
This handlebar bracket has been developed so you can attach a tablet to your handlebars. The design provides a safe distance so that no sweat falls on the screen while you are training. - Suitable for handlebars with a diameter ranging from 26mm to 35mm - Adjustable to different tablet sizes: length 182-267mm, width 112-197mm, max. thickness 13mm
$77.49
A simple, lightweight and versatile mount for positioning the Wahoo ELEMNT between the aero bars. Single bolt clamp and pivoting mount design. - For 22.2mm diameter aero bar extensions - Compatible with Wahoo ELEMNT, Wahoo Bolt, Wahoo MINI - Combo Compatible with use of adapter for GoPro style interface action camera and lights - Replaceable Wahoo insert - Weight: 29g - Anodized Colors: Black - Made in Boise, Idaho, USA - Lifetime Guarantee against material or manufacture defects. Damages due to abuse or crashing excluded
$77.00
The Wahoo BlueSC speed and cadence sensor transforms your phone into a powerful cycling computer. Using Bluetooth Smart and ANT+ technology, it tracks cycling speed, cadence, and distance which can be paired with your favorite cycling app including Strava and Zwift, or paired to your bike computer. It's weatherproof, small with a low drag profile, and comes with a rubber band and zip tie mounts. - Both ANT+ and Bluetooth Smart capabilities allow for a wireless connection to both smartphones and GPS devices. - No tangled wires on your bike to connect the sensor to your device. - Provides accurate speed data during your ride - Provides accurate cadence data during your ride - BlueSC comes with a rubber band mount and zip tie mount. - The Blue SC sensor will fit with most bikes and frame sizes
$74.99
GNT ANT+/BLE 2-in-1 Speed & Cadence Sensor Black Product description - ANT+ and Bluetooth low energy compatible speed and cadence sensor - Attaches with included zip-ties to the frame - Includes mounts, sensor, and magnets
$74.99
Take your riding to the next level with the addition of speed and cadence. Features - Sensor magnet kit for RideSense speed and cadence sensors Kit includes: - RideSense speed magnet - RideSense cadence magnet
$69.99
For CubiCubi 500 / 850 / 1200 - 3.7V 6000mAh Li-ion power bank - Recharge via a micro-USB cable - Charge time (approx) : 4-6hr - Charge phone and other devices with USB charge cable - Input: Micro-USB (5V/1A) - Output: USB (5V/1A)
$69.99
The Wahoo RPM speed sensor is the sleek, magnet-less solution for capturing cycling speed data. It easily mounts to your bike's front wheel hub, and the Bluetooth Smart and ANT+ dual band technology allow you to connect to and display data on both smartphones and bike computers. Tracking speed data has never been this easy. - Both ANT+ and Bluetooth Smart capabilities allow for a wireless connection to both smartphones and bike computers. - No tangled wires on your bike to connect the sensor to your device. - The RPM speed installs easily with no magnets required - It only weighs 16.5 grams with the mount included - Provides accurate speed data during your ride - Mounts on most front wheel hub with a secure silicone casing - Two LED lights show the sensor's device connection (blue) and speed detection (red) - No charging required! Operates on a coin cell battery for up to 1 years. - RPM Speed will fit with most bikes and frame sizes
$64.99
Pro Blendr is the ultimate computer integration system for clean and easy installation directly to Knock Block. - Start with a Knock Block equipped frame using the appropriate frame chip with display tabs, and finish with Pro Blendr Knock Block Computer Mount for secure mounting of computers behind the stem to keep your cockpit spotless. - In addition to the correct frame chip with display tabs, don't forget your Garmin or Wahoo Adapter Puck! These are sold separately so you can build the ultimate Blendr system that's right for you.
$64.99
Garmin's ANT+ USB stick plugs into your computer's USB port to wirelessly transmit your activities to Garmin Connect and Garmin's Training Center. It automatically receives your activity data when your compatible ANT+ Garmin device is within range.
$64.99
The Top Tube Mount places your computer front and center on the top tube of Gravel, MTB, and Adventure Bikes with preset mounting positions. - Compatible with all Garmin cycling computers - Multi-mount positions - Garmin approved insert protects the computer body tabs in the event of a crash - All hardware included - CNC machined in Boise, Idaho USA - Made in USA - Lifetime warranty
$64.99
An excellent choice for mountain, cross, and road cyclists who prefer to have the computer above the stem. The mount replaces a standard 5mm spacer and is locked securely in place by the top cap compression system. - Supported Computers – Wahoo ELEMNT, Wahoo Bolt, Wahoo MINI - Compatible – 1-1/8" Steerer tube Diameter, - Thickness: 5mm, Length 50mm (Center-to-Center) - Recommended for 0 Degree to Negative Degree Stem Angles - CNC Machined 6061-T6 Aluminum Platform, Injection Molded Copolymer Interface - Weight: 25g - Made in Boise, Idaho, USA - Lifetime Guarantee against material or manufacture defects. Damages due to abuse or crashing excluded
$64.99
Symmetry is a beautiful thing. This RideCase mount brings everything in line, front and center to offer easier viewing of your device, a perfectly centered video frame, or a light beam cast in the center of your route. Attaches to 31.8mm diameter handlebars and the QuickClick holder can be rotated for both portrait and landscape orientation. The included sport camera adapters are compatible with different sport cameras like GoPro Hero series, Sony Action Cam series, Shimano Sport Cameras, and Garmin VIRB X / XE. Includes G-Ear Adapter for Garmin cycle computer. - Material: Forged aluminum / Engineering grade plastic - Bracket: For Handlebar (fits 31.8mm) - Max Load: Sport camera 200 g / 7.04 oz - Added Features: Angle adjustment (Sport Camera) Rotates for landscape or portrait viewing (RideCase) - Compatible with RideCase series & PanoComp X Includes T15 wrench - Size: 11 x 6.6 x 4.7 cm / 4.3” x 2.6” x 1.9” (Center Mount only) - Weight: 36 grams
$64.99
- Easy to mount smartphone case holder - High resistance against impacts - 360 degrees adjustable angle - Quarter-turn type mount allows to place the phone in portrait or landscape mode - Waterproof, touch-screen compatible cover included
$60.00
The Wahoo RPM cadence sensor is your sleek little solution for measuring cycling cadence data. It is wireless, magnet-less, lightweight, and easily mounts to your bike's crank arm or to your shoe. Bluetooth Smart and ANT+ dual band technology allows you to connect to and display data on both smartphones and GPS bike computers. Collecting cadence data has never been this easy. - Both ANT+ and Bluetooth Smart capabilities allow for a wireless connection to both smartphones and bike computers. - No tangled wires on your bike to connect the sensor to your device. - It only weighs 7 grams! - Provides accurate cadence data during your ride - (1) mount with double sided 3M tape, or (2) use the silicone sleeve and mount with zip ties. - The RPM can be worn on your shoe for spin classes or use with multiple bikes - Two LED lights show the sensor's device connection (blue) and cadence detection (red) - No charging required! Operates on a coin cell battery for up to 1 years. - RPM cadence sensor will fit with most bikes and frame sizes
$59.99
GNT MTB Mount With Giant & Garmin Tray - CNC machined aluminum material is solid and durable - Puts your computer in an easily accessible and clearly visible but fully protected position - Compatible with Giant or Garmin computers and GoPro mounts. - Fits 31.8mm and 35mm handlebars
$59.99
K-EDGE’s legendary CNC machined aluminum quality and strength for the price conscious cyclist. Pro positioning of your computer, out-front and flush with the top of the handlebar. - CNC Machined 6061-T6 Aluminum Platform, Injection Molded Copolymer Interface - Compatible: Garmin EDGE 820, 520, 510, 500, 25 and 20. - Replaceable Garmin Insert with K-EDGE “Definitive Click” locking system - Fits 31.8MM Handlebars - NOT combo compatible - Weight: 48g - Anodized Color- Black
$59.99
K-EDGE’s legendary CNC machined aluminum quality and strength for the price conscious cyclist. Pro positioning of your computer, out-front and flush with the top of the handlebar. - CNC Machined 6061-T6 Aluminum Platform, Injection Molded Copolymer Interface - Compatibility: Wahoo Bolt - Fits Handlebars: 31.8MM - NOT GoPro Interface Compatible - Anodized Color: Black Please contact K-EDGE warranty manager Info@K-EDGE.com for questions or concerns. We highly suggest you follow the recommendations in the Sigma instructions that recommend use of the provided tether leash.
$59.99
- Discreet way to install an Apple AirTag inside your tubeless tire - Identify the location of a stolen bike, enabling the owner to alert local authorities for retrieval - AirTag is housed in a 3-part silicone and rubber tubeless valve mount - Sacrificial stem, ensures tracker and rim protection under impact - Silicone top cover protects tracker and internal plug reduces sealant ingress - Supplied with 3 pairs of our rubber valve bases to suit different rim profiles for the optimum seal Note the Tubeless Secure Tag Holder can only be used in rear wheels – not for use on the front wheel Compatible tire types: - MTB tyres (XC, Enduro Trail, Downhill) - Gravel Tires (the narrowest recommended tyre size is 38mm wide)